Angles, Channels & Beams
We offer a range of angles and channels for industrial, commercial and construction applications. Products are available in different widths, leg heights, section depths and thicknesses to suit project requirements.
Our structural steel range includes mild steel H beams, I beams, U-channels, C-channels, equal angles, unequal angles and T-angles. Galvanized and other finish options can be discussed when requesting a quotation.
Product Range
Structural sections are available in a variety of dimensions and specifications, subject to availability.
Mild Steel H Beams & I Beams
Mild steel beams are used in structural applications such as building frames and bridges. H beam and I beam sections are available in a range of sizes, subject to specification and availability.
Available Beam Types
| Section Type | Indicative Size Range | Typical Applications |
|---|---|---|
| Mild Steel H Beam | 100 mm to 1040 mm | Building frames, bridges and structural fabrication |
| Mild Steel I Beam | 100 mm to 400 mm | Construction and general structural support |
Size ranges are indicative. Confirm section dimensions, grade, length and applicable standard when enquiring.
U-Channels & C-Channels
Mild steel channels are used for structural support and general fabrication. Available sizes and profiles depend on the required dimensions and specification.
Channel Options
Equal & Unequal Angles
Mild steel angles are commonly used in construction and structural fabrication. Equal angles, unequal angles and T-angles are available in different dimensions and thicknesses. Galvanized options can be requested where required.
Angle Options
Channel Dimensions & Properties
The following channel dimensions and properties are reproduced as a general reference from the supplied information. Confirm section designation, units, tolerances and governing standard before ordering.
Indicative Channel Data
| Designation | Depth H (mm) | Flange Width B (mm) | Web Thickness t (mm) | Weight (kg/m) | Sectional Area (cm²) | Zxx (cm³) | Zyy (cm³) |
|---|---|---|---|---|---|---|---|
| ISMC 75 | 75 | 40 | 4.8 | 7.1 | 9.1 | 20.3 | 4.7 |
| ISBC 100 | 100 | 50 | 5.0 | 9.6 | 12.2 | 37.3 | 7.5 |
| ISMC 125 | 125 | 85 | 5.3 | 13.1 | 18.7 | 88.0 | 13.5 |
| ISMC 150 | 150 | 75 | 5.7 | 16.8 | 21.3 | 105.0 | 19.4 |
| ISMC 175 | 175 | 75 | 6.0 | 19.6 | 24.4 | 139.8 | 22.8 |
| ISMC 200 | 200 | 75 | 6.2 | 22.3 | 28.5 | 181.0 | 26.4 |
| ISMC 250 | 250 | 80 | 7.2 | 30.6 | 39.0 | 307.0 | 36.4 |
| ISMC 300 | 300 | 90 | 7.8 | 36.3 | 46.3 | 428.0 | 47.1 |
| ISMC 400 | 400 | 100 | 8.8 | 50.1 | 83.8 | 760.0 | 67.0 |
Source data references IS 2012:1991. Values are provided for preliminary reference only and should be checked against the applicable standard and supplier documentation.
Have a requirement? Let's discuss your needs.
Share your requirements, dimensions, material, finish, quantity, or project details with APEX ALLOYS INDIA. Our team will assist you with the right solution and quotation.